Bulkheads Part 3

Quarter inch holes were drilled in the intermediate bulkheads for the provision of wiring for a lighting effect. The bulkheads were then glued into position on the hull part.

Additional bracing from scraps of styrene was added to the bulkhead joints for added strength.

Hull plating parts were then cut to size from 0.75mm sheet, squares of 1.5mm detail styrene were cut and added and this was glued to the hull and bulkheads.

This has really started to make the structure quite sturdy, which will only improve as more of the hull plating is glued into position.

More soon.